Hot Bar Soldering System with automatic rotary table (Desktop-edition).

Diameter of turntable up to 500mm.

On the turntable of the system there are mounting possibilities for up to 4 product jigs.

System is equal to Bl40i Standard, but significantly larger in its dimensions.

Depending on the task, up to 4 logic working positions can be allocated, for example:
1. Manual station;
2. Flux station;
3. Hot Bar Soldering;
4. Electrical testing or AOI
Control units for up to 3 soldering bars can be integrated.

Simultaneous loading / unloading and soldering. The turntable is actuated by a drive wheel, launched by a two-handed release.

The turntable is locked automatically and the Hot Bar Soldering process is initiated.

The system enclosure is available in different versions (e.g. ESD acryl glass or profile enclosure with safety door).

Semi-gimballed suspension of the soldering bar for best possible co-planar pressure of the soldering bar on the solder joint (for the soldering of plane solder joints).

Precise linear guide for stranded wire- or cable solderings. Adjustable pressure for both options.

Quick-change system for soldering bars with plug-in connector and mounting device on a pneumatic lifting unit. Change of the soldering bar in <2min.

Active air cooling of the soldering bar at the end of a soldering process.

Duplicated design of temperature control system, incorporating redundancy, with additional thermocouple at the soldering bar.

Complex monitoring capabilities of the programmed soldering profile.

The system control is via a standard PLC with control panel. Customized adjustments, the integration of additional functions and controls of additional processes can be easily implemented.

Various setting parameters, e.g. heating profile, heating times, heating temperatures, temperature gradients, cooling process, lifting temperature, storing of different product and parameter settings, different quantity-, cycle- and OK/NOK counters, automatic calibration for new soldering bars etc.

Customized product jigs.

Permanent force measurement and -monitoring of the soldering process.

Path measurement system for measuring the height of parts and the sinking results.

Flux application systems (manual and automatic).

Camera and monitor to support the operator.

Data communication and data storage of all parameters and measured values in the soldering process.

Components for remote maintenance to grant our technicians access to the PLC control for diagnostics and programming.

Automatic Kapton foil feeder.

Integrated automatic cleaning station for the soldering bar.

Measurement dummies for reproducible measuring of temperature, path and force (for machine capability studies, cmk/cpk-evaluation)
Necessary compressed air supply: 5 Bar, Emergency-Stop function, CE mark of conformity

Hot Bar Soldering System with automatic rotary table (Desktop-edition).

Diameter of turntable: 330mm.

On the turntable of the system there are mounting possibilities for 2 product jigs.

Simultanous loading / unloading and soldering. The turntable is actuated by a drive wheel, launched by a two-handed release.

The turntable is locked automatically and the Hot Bar Soldering process is initiated.

The system enclosure is available in different versions (e.g. ESD acryl glass or profile enclosure with safety door).

Semi-gimballed suspension of the soldering bar for best possible co-planar pressure of the soldering bar on the solder joint (for the soldering of plane solder joints).

Precise linear guide for stranded wire- or cable solderings. Adjustable pressure for both options.

Quick-change system for soldering bars with plug-in connector and mounting device on a pneumatic lifting unit. Change of the soldering bar in <2min.

Active air cooling of the soldering bar at the end of a soldering process.

Duplicate design of temperature control system, incorporating redundancy, with additional thermocouple at the soldering bar.

Complex monitoring capabilities of the programmed soldering profile.

The system control is via a standard PLC with control panel.

Customized adjustments, the integration of additional functions and controls of additional processes can be easily implemented.

Various setting parameters, e.g. heating profile, heating times, heating temperatures, temperature gradients, cooling process, lifting temperature, storing of different product and parameter settings, different quantity-, cycle- and OK/NOK counters, automatic calibration for new soldering bars etc.

For the standard system, numerous additional functions are available:

Customized product jigs.

Permanent force measurement and -monitoring of the soldering process.

Path measurement system for measuring the height of parts and the sinking results.

Flux application systems (manual and automatic).

Camera and monitor to support the operator.

Data communication and data storage of all parameters and measured values in the soldering process.

Components for remote maintenance to grant our technicians access to the PLC control for diagnostics and programming.

Automatic Kapton foil feeder.

Integrated automatic cleaning station for the soldering bar.

Measurement dummies for reproducible measuring of temperature, path and force (for machine capability studies, cmk/cpk-evaluation).

Necessary compressed air supply: 5 Bar, Emergency-Stop function, CE mark of conformity.

Hot Bar Soldering System with automatic rotary table (Desktop-edition).

Diameter of turntable: 330mm.

On the turntable of the system there are mounting possibilities for 2 product jigs.

Simultanous loading / unloading and soldering.

The turntable is actuated by a drive wheel, launched by a two-handed release.

The turntable is locked automatically and the Hot Bar Soldering process is initiated.

The system enclosure is available in different versions (e.g. ESD acryl glass or profile enclosure with safety door).

Semi-gimballed suspension of the soldering bar for best possible co-planar pressure of the soldering bar on the solder joint (for the soldering of plane solder joints).

Precise linear guide for stranded wire- or cable solderings. Adjustable pressure for both options.

Quick-change system for soldering bars with plug-in connector and mounting device on a pneumatic lifting unit. Change of the soldering bar in <2min.

Active air cooling of the soldering bar at the end of a soldering process.

Duplicate design of temperature control system, incorporating redundancy, with additional thermocouple at the soldering bar.

Complex monitoring capabilities of the programmed soldering profile.

The system control is via a standard PLC with control panel.

Customized adjustments, the integration of additional functions and controls of additional processes can be easily implemented.

Various setting parameters, e.g. heating profile, heating times, heating temperatures, temperature gradients, cooling process, lifting temperature, storing of different product and parameter settings, different quantity-, cycle- and OK/NOK counters, automatic calibration for new soldering bars etc.

Hot Bar Soldering System with automatic rotary table (Desktop-edition).

Diameter of turntable up to 500mm.

On the turntable of the system there are mounting possibilities for up to 4 product jigs.

System is equal to Bl40i Standard, but significantly larger in its dimensions.

Depending on the task, up to 4 logic working positions can be allocated, for example:
1. Manual station;
2. Flux station;
3. Hot Bar Soldering;
4. Electrical testing or AOI
Control units for up to 3 soldering bars can be integrated.

Simultaneous loading / unloading and soldering. The turntable is actuated by a drive wheel, launched by a two-handed release.

The turntable is locked automatically and the Hot Bar Soldering process is initiated.

The system enclosure is available in different versions (e.g. ESD acryl glass or profile enclosure with safety door).

Semi-gimballed suspension of the soldering bar for best possible co-planar pressure of the soldering bar on the solder joint (for the soldering of plane solder joints).

Precise linear guide for stranded wire- or cable solderings. Adjustable pressure for both options.

Quick-change system for soldering bars with plug-in connector and mounting device on a pneumatic lifting unit. Change of the soldering bar in <2min.

Active air cooling of the soldering bar at the end of a soldering process.

Duplicated design of temperature control system, incorporating redundancy, with additional thermocouple at the soldering bar.

Complex monitoring capabilities of the programmed soldering profile.

The system control is via a standard PLC with control panel. Customized adjustments, the integration of additional functions and controls of additional processes can be easily implemented.

Various setting parameters, e.g. heating profile, heating times, heating temperatures, temperature gradients, cooling process, lifting temperature, storing of different product and parameter settings, different quantity-, cycle- and OK/NOK counters, automatic calibration for new soldering bars etc.

Hot Bar Soldering System with sliding table (Desktop-Edition).

With exchangeable base plate on the sliding table for different jigs and workpiece holders. Dimensions of sliding table: 250x250mm.

The workpiece holder can be loaded in the extracted state of the sliding table. Standard: Manual movement of the sliding table.

Option: Automatic drive
The table is locked automatically and the Hot Bar Soldering process is initiated.

The system enclosure is available in different versions (e.g. ESD acryl glass or profile enclosure with safety door).

Semi-gimballed suspension of the soldering bar for best possible co-planar pressure of the soldering bar on the solder joint (for the soldering of plane solder joints).

Precise linear guide for stranded wire- or cable solderings. Adjustable pressure for both options.

Quick-change system for soldering bars with plug-in connector and mounting device on a pneumatic lifting unit. Change of the soldering bar in <2min.

Active air cooling of the soldering bar at the end of a soldering process.

Duplicated design of temperature control system, incorporating redundancy, with additional thermocouple at the soldering bar.

Complex monitoring capabilities of the programmed soldering profile. The system control is via a standard PLC with control panel.

Customized adjustments, the integration of additional functions and controls of additional processes can be easily implemented.

Hot Bar Soldering System with automatic rotary table Desktop-edition.

Diameter of turntable: 330mm.

On the turntable of the system there are mounting possibilities for 2 product jigs.

Simultanous loading / unloading and soldering.

The turntable is actuated by a drive wheel, launched by a two-handed release.

The turntable is locked automatically and the Hot Bar Soldering process is initiated.

The system enclosure is available in different versions (e.g. ESD acryl glass or profile enclosure with safety door).

Semi-gimballed suspension of the soldering bar for best possible co-planar pressure of the soldering bar on the solder joint (for the soldering of plane solder joints).

Precise linear guide for stranded wire- or cable solderings. Adjustable pressure for both options.

Quick-change system for soldering bars with plug-in connector and mounting device on a pneumatic lifting unit. Change of the soldering bar in <2min.

Active air cooling of the soldering bar at the end of a soldering process.

Duplicate design of temperature control system, incorporating redundancy, with additional thermocouple at the soldering bar.

Complex monitoring capabilities of the programmed soldering profile.

The system control is via a standard PLC with control panel.

Customized adjustments, the integration of additional functions and controls of additional processes can be easily implemented.

Various setting parameters, e.g. heating profile, heating times, heating temperatures, temperature gradients, cooling process, lifting temperature, storing of different product and parameter settings, different quantity-, cycle- and OK/NOK counters, automatic calibration for new soldering bars etc.

For the standard system, numerous additional functions are available:

Customized product jigs.

Permanent force measurement and -monitoring of the soldering process.

Path measurement system for measuring the height of parts and the sinking results.

Flux application systems (manual and automatic).

Camera and monitor to support the operator.

Data communication and data storage of all parameters and measured values in the soldering process.

Components for remote maintenance to grant our technicians access to the PLC control for diagnostics and programming.

Automatic Kapton foil feeder.

Integrated automatic cleaning station for the soldering bar.

Measurement dummies for reproducible measuring of temperature, path and force (for machine capability studies, cmk/cpk-evaluation).

Necessary compressed air supply: 5 Bar, Emergency-Stop function, CE mark of conformity.